Veryd Date:Jan 31, 2014 2:31 PMTitle:Re: Your favorite hobby.
My job would be my hobby but is apparently too expensive for me. 1200$ to begin with and another 200-900$ for each additional thing I add.
Actually it's about programming the S7 for the industry, like you would say "You need to push switch 1(E0.0) and 2(E0.1) at the same time so the engine would run even if you remove your hands but only until you press switch 3(E0.2) or a sensor (E0.3) would detect that the engine already reached it's goal. So would be E0.1&E0.2 on a set-reset flip flop as the set condition, while E0.2 OR 0.3 would be the reset condition." <= Only much more complicated
Else it would be meeting friends, gaming on my pc, watching movies or just snuggle
Here, to show how I've been advancing in my hobby. Warning, good custom knives can sell past 100 bucks. I've sold one for 500 already. but at the knife show I most recently went to, I saw a 2,000 dollar custom knife and sheath, hand forged, hand tooled, and heat treated at home. The blade was made of 440 stainless, the wood scales were made of Bloodwood, hand etched celtic knots in the blade, the pins for the handle were made of sivler, the sheath was hand tooled with a celtic cross wrapped in barbed wire with an assortment of rose vines tied in celtic knots and made of 1/4 thick tooling leather.
Knife: This is a full tang knife meaning you can see the metal in the handle, it's stable and a lot more reliable then a hidden tang. It's made out of basic steel hardened and tempered in a ground forge. The design I went for was infantry so I had multiple uses for it. I took a straight bevel (Scandy grind) it's got a nice curve for skinning, the clip is angled just right for stabbing, it's straight and tappers inward from the curve down for hard cutting. and I've already tried it while getting a piece of metal out my skin, it works really good for laying your own arm open. The scales on the handle (The pieces of wood) are made of redwood, I put a burn finish on them, coated them with gunstock red wood dye, then put a gloss finish on them and polished them by hand. The pins are aluminum barrel bolts. and it has a black 550 paracord lanyard XD
Date:Jan 31, 2014 12:17 PM Title:Re: Your favorite hobby.
leiger
Administrator, AGN.PH Minecraft Server (mc.agn.ph)
Date:Jan 31, 2014 2:31 PM Title:Re: Your favorite hobby.
1200$ to begin with and another 200-900$ for each additional thing I add.
Actually it's about programming the S7 for the industry, like you would say "You need to push switch 1(E0.0) and 2(E0.1) at the same time so the engine would run even if you remove your hands but only until you press switch 3(E0.2) or a sensor (E0.3) would detect that the engine already reached it's goal. So would be E0.1&E0.2 on a set-reset flip flop as the set condition, while E0.2 OR 0.3 would be the reset condition." <= Only much more complicated
Else it would be meeting friends, gaming on my pc, watching movies or just snuggle
Date:Feb 1, 2014 5:41 PM Title:Re: Your favorite hobby.
the more messier your room is the smarter you are.
Date:Feb 4, 2014 8:41 PM(Edited:Feb 4, 2014 8:51 PM) Title:Re: Your favorite hobby.
Knife:
This is a full tang knife meaning you can see the metal in the handle, it's stable and a lot more reliable then a hidden tang. It's made out of basic steel hardened and tempered in a ground forge. The design I went for was infantry so I had multiple uses for it. I took a straight bevel (Scandy grind) it's got a nice curve for skinning, the clip is angled just right for stabbing, it's straight and tappers inward from the curve down for hard cutting. and I've already tried it while getting a piece of metal out my skin, it works really good for laying your own arm open. The scales on the handle (The pieces of wood) are made of redwood, I put a burn finish on them, coated them with gunstock red wood dye, then put a gloss finish on them and polished them by hand. The pins are aluminum barrel bolts. and it has a black 550 paracord lanyard XD
Date:Mar 11, 2014 11:59 PM Title:Re: Your favorite hobby.
My tumblr where I dump all my drawings.
My FurAffinity where I'm a little more picky about what I upload.